The “check engine” light on his vehicle would go off and on again and again. What’s the matter? This can happen regardless of the make and make of your car, whether you drive a Ford, Audi, Volkswagen, or Toyota. Don’t panic – the Actron CP9135 AutoScanner will be there to rescue you!

When the warning light comes on, it’s just your car trying to tell you that something is not right. Like R2D2 on StarWars, the AutoScanner Actron CP9135 (OBD II compliant) can connect to your On-Board Diagnosis II (OBD II) compliant vehicle to access information stored on your vehicle’s computer. It can be used in all OBD II compliant vehicles made in North America, Europe and Asia since 1996.

The AutoScanner Actron CP9135 features a large, easy-to-read LCD screen that shows the definition of the fault code. For ODB II compliant vehicles (1996 and newer), the AutoScanner Actron CP9135 provides fault code data, then clears the fault code and turns off the Check Engine light. Although you may still have to fix the problem, the scanner turns off the “Check Engine” warning light on your vehicle’s dash so you won’t be distracted while you continue driving.

The AutoScanner Actron CP9135 is simple and easy to use even for a non-professional user. The attached 16-pin OBD II connector cable provides connections for power and data, while the eight-foot cable and rugged housing are oil and grease resistant for durability. The long cable that connects to the computer makes it easy to use in tight spaces. Once connected, simply press the “READ” key and the very easy-to-use menu displays a variety of information in an instant. Use the Monitor Status and Inspection / Maintenance (I / M) feature to determine the chances of your vehicle passing an emissions inspection. I / M Readiness is a pragmatic feature that can be used just before your vehicle is tested to verify that it meets the standards of a state emissions program.

One very important thing to note is that all emissions testing facilities will not pass any vehicle that has a “Check Engine” light illuminated at the time of inspection, even if the light is only on to remind you of a delay. . gold oil change at 60,000 miles of tune up. With the AutoScanner Actron CP9135, you can turn off the check engine light and clear the emissions test without unnecessary hassle. The menu also reminds you of pending DTCs and reads the status of the malfunction indicator lamp. By reading the status of the malfunction indicator lamp, the scanner gives an idea of ​​what could cause the Check Engine light to come on in the near future. In this way, the Actron CP9135 scanner can also provide some preventative measures to help a non-professional user monitor a vehicle’s on-board systems.

In conclusion, the helpful functions of the Actron CP9135 AutoScanner, along with the simple “READ” and “CLEAR” keys used to read and clear DTCs, make the Actron CP9135 AutoScanner a perfect tool for identifying and solving problems with your vehicle. , which relieves you of unnecessary headaches and more importantly, instead of paying a lot of money to car mechanics, it helps you locate and repair simple and straightforward problems in your car, saving you money .

Leave a Reply

Your email address will not be published. Required fields are marked *